30000 BTU Ductless Air Conditioner, Heat Pump Mini Split: 2.5 TON /

30000 BTU Ductless Mini Split AC: 20 SEER   Inverter w/ 30,000 BTU Heat Pump Brand new for 2016, the 30000 BTU - 20 SEER Hyper HEAT Ductless Mini Split air conditioner and Heat Pump by Thermocore provides both cooling & heating in areas up to 1500 ft² large.  Benefits of this series Include: I-Feel control, Anti-bacteria Filtration, intelligent Control Systems and comes fully charged with R410A.  Includes a Digital LCD remote control, installation kit with 15 ft of copper piping+wire and Full 1/5 Year Warranty Package.  This system maintains heat functions to ambient temps down to 5F Technical Data: System Includes: 30,000 BTU INVERTER Cooling Capacity 30,000 BTU INVERTER Heat Pump 19.8 SEER - 11.5 HSPF - AHRI CERTIFIED

Pre-Charged with ECO-Friendly R410A

1 Year Parts - 5 Year Compressor Warranty 

Indoor Unit - Air Handler.

Outdoor Unit - Compressor.

Digital Multi-function LCD Remote Control.

Installation Kit with 15ft of lineset

and wire.

 >>>

Product and Installation Manual.

Top Line Features: 19.8 SEER - 11.5 HSPF

- AHRI CERTIFIED

Pre-Charged w/ Eco-friendly R410A Refrigerant

Includes Anti-Fungus Bacterial Filter as Bonus

HYPER HEAT FUNCTIONS MAINTAINS HEAT OUTPUT CAPACITY

I-Feel / Follow Me Technology Tracks Remote

Cross Flow Technology reduces noise output

Easy Maintenance - Panel Removes for Access

Low Ambient Heating Temp. Operation

Two-direction Air vane Evenly Distributes Air

1 Year Part - 5 Year Compressor Warranty 

Install Kit Contents: 15 Ft Flared Copper Tubing 15 Ft Pipe Insulation 15 Ft Electrical Wire - INDOOR>OUTDOOR

(16/4)

Drain Pipe (indoor) Wall Bracket for Indoor Unit Plastic Pipe Wrap Installation and User Manual Neoprene  Putty

to Seal Holes

Extend included 15 foot copper lineset and Wire to 26-36-50-75 feet. Just $8.00 / ft WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. Click for Installation Manual. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split* *5 Year Compressor - 1 Year on all other Parts*
Registration card will be sent with unit, this card should be completed by an HVAC technician (installer).  Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.  Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge.   The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed.  Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty).  If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost.  Damaged / Defective product will be picked up and a brand new exchange will be shipped out. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via Please provide a contact phone# upon checkout > Condenser Ground Stand - Provides Flat even surface - Avoids debris obstruction Price: $173.00
Click for more Info 25' Extension kit (3/8 x 5/8) - Extend included 12 ft copper lineset to 25 ft. Price:  $139.00
Click for more Info Condenser Bracket - Mount your condenser at any height on an outdoor sidewall Price: $49.00
Click for more Info Micro-Pump II - Required when mounting air handler on Interior wall Price: $184.00
Click for more Info

Returns Accepted for this item if it's within 30 Days