27000 BTU Tri Zone Ductless Mini Split Air Conditioner HYPER HEAT PUMP:

Thermocore 36000 BTU AC-Heat 22 SEER

27000 BTU Tri Zone Energy Star Mini Split AC
23 SEER Efficiency w/ HYPER HEAT PUMP Technology
With a 27000 BTU total Cool / Heat Capacity, the Thermocore T7HH25D-H236-9+9+9 Energy Star mini split air conditioner can cool or heat 3 separate zones of 9000 BTU for a total coverage area of 1200 ft² (400 ft² x 3). Most Energy Efficient Tri-Zone series in the market! A 23 SEER coupled with Inverter technology provides the benefits of low operation temps down to -22F as well as maximum efficiency. NO Linesets Included


Technical Data:
System Includes:

• 27,000 BTU INVERTER Cooling Capacity
• 27,000 BTU INVERTER Heat Pump Capacity
• 23 SEER - 10 HSPF - 12 EER / ENERGY STAR Certified
• Pre-Charged with R454B for 75ft of Lineset
• 1 Year Parts - 5 Year Compressor Warranty View Details >

• Outdoor Unit (Condenser)
• Indoor Unit - Air Handler x 3
• Digital Multi-function Remote Control x 3
• Product and Installation Manual. >>>

Top Line Features:

• 23 SEER - 11.30 HSPF - ENERGY STAR
• Most Energy Efficient Tri-Zone Series on Market
• Dry-Mode removes moisture w/o affecting temp
• Cross Flow Technology reduces noise output
• Compatible with over 5 Filtration medias
• Low Ambient Temperature Operation (-22° F)
• Compressor belt helps for heating in winter temps
• Restart IC: Settings restored Following Outage
• Follow-Me Function tracks Remote Location

** Installation Lineset Sold Seperately: Available in 15-75ft Lengths.
Click here to Purchase.

Capacity 9000 BTU Air Flow (Hi/M/Lo) 440/380/260 cfm Power Supply 230 V / 60 Hz / 1Ph Noise Output (Hi/M/Lo) 43/37/31 dBA Liquid / Gas 1/4" x 3/8" Weight 17.6 lbs Dimensions (W x D x H) 32.9" × 7.8" × 11" inches

Model Number T7HH23D-H236-C Compressor Brand TOSHIBA - GMCC Capacity 27000-33000 BTU Maximum AHU Capacity 48000 BTU Air Flow 2148 CFM Power Supply 230 V / 60 Hz / 1Ph Fuse Size 30A SEER 23 EER 12 HSPF4 10 Sound Level 61 dBA Operating Temp Range -22 F to 122 F (cool and heat) Refrigerant R454B / 121oz Charge Liquid / Gas 1/4" x 3/8" (3) + 1/4" x 1/2" (1) Max Lineset Length (1 zone) 114 ft Max Lineset Length (all zones) 263 ft Pre-Charge Length 100 ft (25 ft x 4) Weight 168.4 lbs Dimensions (W x D x H) 37.24 × 16.14 × 32 inches


WHAT IS DC INVERTER?

DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.

Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained.









BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R454B Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split* Click for Installation Tip. It is highly advised a certified HVAC technician complete installation to be eligible for warranty.

*5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out. 1 YEAR PARTS WARRANTY CAN BE EXTENDED TO 2 YEARS FOR AN ADDITIONAL $72.00

SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS!
Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Warren, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. System comes with Free shipping - this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately - please contact our offices. Additional freight for Canadian registries is usually around $150. (import and duties may apply).