You must have javascript enabled to use splitheatpumpsi.com !

12000 BTU 19 SEER Ductless Mini Split Air Conditioner Heat Pump,

Ceiling Casette

USD $846.08

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: T4E19S-H112 w/ 15ft line/wire This site contains affiliate links for which we may be compensated Home & Garden / Home Improvement / Heating, Cooling & Air / Central Heating & Cooling Systems / Ductless Mini Split Systems

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
12000 BTU Ductless Mini Split AC: 115VAC-220VAC 19 SEER 12000 BTU Inverter Heat Pump Thermocore  T4E19S-H212 T4 Series Ductless Mini Split 12000 BTU Inverter Cooling Capacity along with a 12000 BTU Heat Pump, this 1 TON Ductless Split can cool or heat an area upto 600 square feet.  Advanced INVERTER DC Technoloy provides both energy efficient operation and low ambient operation start-ups. Additional features include auto-diagnostic functions and sleep mode / 24 hour timer.   Comes pre-charged with eco-friendly R410A and includes complete install Kit. Technical Data: System Includes: 12,000 BTU INVERTER Cooling Capacity 12,000 BTU INVERTER Heat Pump 19 SEER - AHRI CERTIFIED
  • Pre-Charged with ECO-Friendly R410A
  • 1 Year Parts - 5 Year Compressor Warranty 
  • Indoor Unit - Wall Mount or Cassette Air Handler.
  • Outdoor Unit - Compressor.
  • Digital Multi-function LCD Remote Control.
  • Wall Mounted thermostat .
  • Installation Kit with 15ft-50ft of lineset
  • and wire.
  •  
  • Product and Installation Manual.
  • Top Line Features: 19 SEER - 9.5 HSPF - ENERGY STAR
  • Pre-Charged w/ Eco-friendly R410A Refrigerant
  • Ideal for Large Commercial Applications
  • Built in Drain Pump removes Moisture
  • Cross Flow Technology reduces noise output
  • Freon Leak Detection > Notification system
  • Low Ambient Temperature Operation (5 F)
  • Restart IC: Settings restored Following Outage
  • Follow-Me Function tracks Remote Location
  • Indoor Unit (evaporator) specs Model Number T4E19S-H112-E / T4E19S-H212 Capacity 12000 BTU Air Flow (Hi/M/Lo) 294/212/171 cfm Set Temp. Range 62 - 90 F Input Power 45W Noise Output (Hi/M/Lo) 38/30/28 dB(A) Liquid / Gas 1/4" x 3/8" Weight 19 lbs Dimensions (W x D x H) 31.57 x 7.44 x 11.7 in. Outdoor Unit (condenser) specs Model Number T4E19S-H112-C Compressor Brand TOSHIBA - GMCC Rated Capacity 12000 BTU Heating Capacity 12000 BTU Air Flow 1176 CFM Power Supply 115 VAC / 220 VAC Rated Output 1025W Rated Current 8.93A Breaker Size 20A SEER 19 EER 10.5 HSPF4 9.5 Noise Output (Hi/M/Lo) 55/41/34 dBA Moisture Removal                 1.2 L/hr Operating Temp Range 5 - 122 F (cool and heat) Refrigerant R410A / 30oz Charge Liquid / Gas 1/4" x 1/2" Max Lineset Length 82 ft Max Lineset Elevation 33 ft Precharge Length 25ft ft Weight 70.33 lbs. Dimensions (W x D x H) 31.5 x 13.1 x 21.8 in Install Kit Contents: 15-65 Feet Flared Copper Tubing 15-65 Pipe Insulation 15-65 Electrical Wire Harness Drain Pipe (Indoor) Hanging Bracket Kit for Indoor Unit
  • Binding Belt - Catchment Trough
  • Remote Control and Install manuals WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split*It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below > *5 Year Compressor - 1 Year on all other Parts*
    Registration card will be sent with unit, this card should be completed by an HVAC technician (installer).  Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.  Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge.   The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed.  Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty).  If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost.  Damaged / Defective product will be picked up and a brand new exchange will be shipped out. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Warren, Michigan and are palletized onto a single skid.  Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only).  SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order.  Failure to provide valid contact# will delay order.  System comes with Free shipping - this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately - please contact our offices.  Additional freight for Canadian registries is usually around $150. (import and duties may apply). Condenser Ground Stand - Provides Flat even surface - Avoids debris obstruction Price: $173.00
    Click for more Info 25' Extension kit (1/4 x 1/2) - Extend included 15 ft copper lineset to 25 ft. Price:  $49.00
    Click for more Info Condenser Bracket - Mount your condenser at any height on an outdoor sidewall Price: $89.00
    Click for more Info Micro-Pump II - Required when mounting air handler on Interior wall Price: $184.00
    Click for more Info

    Returns Accepted for this item if it's within 30 Days

    12000 BTU 19 SEER Ductless Mini Split Air Conditioner Heat Pump, Ceiling Casette
    goodman mini split heat pump | bosch mini split heat pump | trane mini split heat pump | solar powered mini split heat pump | quad zone mini split heat pump
    See more
    Price type
    IN STOCK OUT STOCK